FR4 Epoxy FiberLocation：首页 > Products > FR4 Epoxy Fiber > 正文
Name: FR4 epoxy fiber glass rod
Color:light green
ShapesInclude: Rods
1. Define and purpose
Thislaminated product is formed through heat pressing after electric industryalkali glass cloth dips into
theepoxy resin. It has high mechanic and dielectric performance, applicable asinsulation
structural components forelectromechanical/electrical equipment, as well as used under dampenvironmental conditions and in oil of transformer. And it can Withstand a variety of chemicalsolvents and acid erosion.
2. Technical requirement for surface
Thesurface shall tidy and smooth, bubble, impurity are not allowed. But slight scratchand color punctum are allowed. Edge is to be cut smooth. The delamination andcrackle on the end surface are not allowed
3. Main technical specifications:
| Test Item |
Unit | Material: Epoxy resin, fiber glass |
FR4 Epoxy | ||
| Vertical layer Direction Flexural Strength Normal≥ | MPa | 340 |
| Vertical Layer Direction compressive strength ≥ | MPa | 350 |
| Parallel layer Direction IZOD Impact Strength simply-supported beam method ≥ | KJ/m2 | 33 |
| Parallel layer Direction shearing strength ≥ | MPa | 34 |
| Tensile Strength ≥ | MPa | 240 |
| Vertical Layer Direction Electrical strength 900C, (in oil 20 seconds), Gradual step-up method | mV/m | 13.7 |
| Parallel layer Direction VB(breakdown voltage)＞ | KV | 50 |
| Relative dielectric permittivity 50Hz ≤ | 5.5 | |
| Dielectric loss module 50Hz ≤ | 0.04 | |
| Insulation resistance after immersion in water ≥ | Ω | 1.3×1012 |
| Density | g/cm3 | 2.0±0.15 |
| Water absorption Plate thickness 1.6 mm ≤ | mg | 19 |
| Flammability | FV | 0 |
| Heat resistance ≥ | 0C | 170 |
| Color | Green | |
| Size | mm | 1020×1220 |
| Executive Standard | GB/IPC4101 | |
IV. Application
Chemical machine parts ,general machine parts and gear ,and generators, Pads, base, baffle etc..Generator ,transformer, fixture, inverter, motorand electric insulation component.
5.Size:
| FR4 Epoxy rod | |
| Diameter(mm) | Length(mm) |
| 5mm--80mm | 1000mm |
| 90mm—170mm | 1000mm |